Table of Contents
How much does a Turbo 350 transmission weigh?
The 350 transmission is 21-3/4″ long and its one-piece case is cast of aluminum alloy. It features an integral bellhousing. The TH350 weighs 120 lbs. It has a distinctive oil pan that is chamfered at the passenger side, rear corner.
How much does a Powerglide transmission weigh?
Weight-wise, ATI’s lightest Powerglide in a Supercase is 100 pounds, a standard weight Powerglide in a Supercase is 120 pounds, and an OEM-cased Powerglide is roughly 105 pounds. On the other hand, a TH400 can weigh up to 139 pounds with a deep pan.
What’s the difference between a 350 Turbo and 400 transmission?
They are completely different transmissions. The Turbo 400 is larger, longer, and heavier than the Turbo 350 and was designed to live behind higher-torque applications such as big-blocks. If you’re worried about the ultimate strength of the transmission, consult one of the transmission specialists for upgrades.
How good is a TH400 transmission?
The TH400 is an automatic shift, three-speed, longitudinally positioned transmission. It is widely regarded to be a supremely durable and legendary transmission. The TH400 is conservatively rated at 450 ft.
How heavy is a Turbo 400 transmission?
Features of the TH400 Transmission Weighs 135 pounds without fluid.
How many gears does a 400 Turbo transmission have?
three
TH-400 transmissions are three-speed automatics, with a 2.48:1 first gear. Reverse gear is 2.08:1 and third gear is an even 1 to 1. Turbo 400s use three tail shaft lengths; the most preferred units for a GM swap would have the short 4-inch tail shaft.
How much horsepower can a Turbo 400 transmission handle?
About 400-450 HP/TQ is the limit on the stock TH400. With ONE almost free modification and some minor valve body calibration changes, 800 HP on an otherwise stock TH400 is not a problem if it’s assembled well (good endplay, etc), and the 34 element sprag is a wise addition above 450 HP or any drag usage.
Does a Turbo 400 transmission have overdrive?
Some refer to the 4L80E as the TH400 with an overdrive ratio, as much of the internals are interchangeable. TCI has a complete line of 4L80E transmissions in the Street Fighter and Super Street Fighter trim levels.
How much HP can a TH400 handle?
How much is a Turbo 400 transmission?
Compare with similar items
| This item Gm Turbo 400 Transmission TH400 Stage 2 Race Up to 650 HP | GM Turbo 400 Conversion Kit Transmission TH400 Stage 2 Race Up to 650 HP | |
|---|---|---|
| Add to Cart | Add to Cart | |
| Customer Rating | (0) | (0) |
| Price | $1,699.00 | $2,099.00 |
| Sold By | Patriot Transmission & Performance | Patriot Transmission & Performance |
How strong is a Turbo 400 transmission?
The TH400 has been rated at 450 ft. lbs. of input torque, nonetheless, aftermarket designs that have been modified may go beyond that rating.
How much does a TH400 transmission weight?
Some areas are cast iron, such as the center support for the transmission. The TH400 is 24.37″ long and comes in at a weight of 135 pounds dry. This transmission does vary in the amount of fluid required, based on certain specifications such as which torque converter is used.
How many quarts of Tran fluid does a TH400 take?
That being said, a common fill volume is between 11-12 quarts for a stock transmission. The TH400, or Turbo 400, transmission was a 3 speed automatic that was first produced in 1964.
What are torque specs on a TH400 transmission?
The TH400 is an automatic shift, three-speed, longitudinally positioned transmission. It is widely regarded to be a supremely durable and legendary transmission. The TH400 is conservatively rated at 450 ft. lbs . of input torque. Aftermarket building techniques take it well past that figure.
How many quarts to fill a TH400?
On a Th400 the Total Amount of Fluid, Measured in Quarts, That it will Take To fill the Transmission will Approximately be 2 Quarts More than the Number of Inches of your Torque Converter. For Example if you Have a 8 Inch Converter it will take Approximately 10 Quarts of Fluid, if you have a 10 Inch Converter it will Take Approximately 12 Quarts