How many inches can an above-ground pool be unlevel?

How many inches can an above-ground pool be unlevel?

two inches
Any more than two inches is unacceptable. Intex pools that are three inches off or more will not last and no one should be swimming in one. Not only does it look very bad, once the uneven wall starts to create the outward pressure one side it will eventually push the pool out of shape more and more.

What happens if your above-ground pool is unlevel?

If you install an above-ground pool on an uneven surface, the walls can collapse due to uneven pressure. The water will press with more force on one section of the pool than the others. A pool with an inflatable ring is more likely to fold under this increased pressure, but even a pool with solid side panels can fail.

How uneven Can an Intex pool be?

It’s possible to have your Intex pool unlevel to be two inches off. This won’t cause any structural issues so you can still use your swimming pool. Any more than two inches is unacceptable. Intex pools that are more than two inches off won’t last long and can be too dangerous for you and your family to use.

Do you have to level the ground for an above-ground pool?

Above-ground pools need to be placed on level ground or you will find yourself with an unnatural shallow end to your pool. Besides being unsightly, an improperly installed pool is unstable. Not only do you risk injury to swimmers and bystanders in the event of a pool collapse, but you risk the end of summer fun.

Why did my above ground pool collapse?

Pool Collapse – An above ground pool collapse is often caused by the results of ice damage, but it can also happen when there is too much snow accumulated on top of the pool and the frame cannot handle the weight.

Will a above ground pool collapse?

Above ground pools are more likely to collapse than inground pools, but both types of pools are capable of collapsing. Groundwater can also push against the pool walls and cause it to collapse. The pool was installed on sloping ground or the ground erodes and sinks. The pool was installed incorrectly.

Does an above ground pool freeze solid?

Above ground pools will freeze solid from side to side within a few days in temperatures below zero degrees. However, very rarely will a pool freeze all the way to the bottom. The ice sheet at the top will typically become thicker by one-fourth inch every few days.

How many inches should an above ground pool be?

Manufactures typically state a pool should be level within an inch, while those who are OCD may try to do even better. An above ground pool that is off level by 3 inches or more is unsafe. That means all the footings need to be within an inch of the same elevation.

What to use for leveling an above ground pool?

What to Use for Leveling an Above Ground Pool. The most “off level” an above ground can get is around three to four inches off. This means when the pool is filled, on the one side the pool structure is three or four inches higher above the waterline than on the other side. Chief Obvious nature fact: Water is always level with the earth.

Why is my above ground pool higher than the ground?

Then you notice that the water level is higher on one side than the other. That means the ground under your pool isn’t perfectly level. One inch off? Level ground is essential for above ground pools. If one side is an inch lower than the other, the water level will be higher on that side.

Is it safe to have an above ground pool?

Any and all above ground pools require a flat space covered in grass or sand. If you install it on anything else you will have trouble with the liner, water level, and pool walls, and it will be very unsafe. So, how unlevel can an above ground pool be?