How do I adjust the sensitivity on my Viper alarm?

How do I adjust the sensitivity on my Viper alarm?

Look for a small knob or inset screw along one side of the unit. This will be the adjustment dial. Using your finger (if possible) or a small flathead screwdriver, turn the dial clockwise to turn the sensitivity up, and counterclockwise to lower the sensitivity.

How do I fix my Viper alarm?

If you want to reset your Viper alarm, you can do so with your car’s fob key.

1. Point the fob key toward your vehicle as the alarm sounds.
2. Listen and wait for your alarm to sound for six seconds. Press the lock button on your key. Your vehicle’s Viper alarm will reset but the alarm will still be armed.

How do you arm a Viper alarm?

Enable the passive arming if it has been programmed by your installer. Turn the ignition off then exit the vehicle and close the door. The Viper alarm will count down. The system will chirp at 20 seconds to warn you it is about to arm and will then arm at 30 seconds.

What is valet mode on Viper alarm?

What is Valet Mode? We all need to let other people operate our vehicle at some point or another. Whether it’s a valet at a restaurant or a mechanic at your local garage. With valet mode, you can disarm your alarm and hand the keys over without the worries of handing over your alarm system.

How do I turn down the sensitivity on my car alarm?

The sensitivity of a car alarm is usually set on the shock sensor, which is going to be a small box that’s about three square inches underneath the dashboard on the driver’s side. You can adjust this shock sensor by moving the adjustment dial. Turning it counter clockwise will turn it down.

How do I change the sensitivity on my alarm code?

Adjust the sensitivity on my Code Alarm PC7500 or ELITE7500 Remote Start Security System

1. Open one of the vehicle’s doors.
2. Turn the Ignition switch to full ON position (do not start the vehicle)
3. Press and hold the Override button until you hear 3 siren chirps / release the button.

How do I activate my Viper car alarm?

Press and hold the lit icon on your remote that resembles a closed padlock for about one second until the alarm makes the sound of a siren. The parking lights on the vehicle will quickly go on and off to give you a visual indicator of the lock engaging and the activation of the alarm.

Where is the valet override button?

Typical locations for valet switch: Under the driver’s side dash (mounted in the under-dash covering trim panel or wire-tied to a harness) Mounted in the driver’s side kick panel. Mounted in the steering column plastic housing.

How do I get my Viper alarm out of valet mode?

This method has you open the driver door, then press the lock button, immediately followed by the unlock button, immediately followed by the lock button again. The LED will illuminate solid to indicate the vehicle is in valet mode. To exit this mode, simply repeat the process.

How do you adjust the alarm sensitivity?

What can a Viper alarm do for You?

Viper alarm is an important system that comes with several useful features for your car. With a viper alarm, you can arm or disarm your vehicle at any time. It also has a kill engine feature programmed to it, meaning that it can stop your car engine from starting.

How can I Reset my Viper car alarm?

Step 1: Start by unplugging the brain from the harness of your car. Step 2: Turn the ignition on before you plug the brain back in. This will help you shut down and restart the alarm system as well as resetting your viper alarm. And you are done!

Why is my Viper remote not working properly?

This is a safety feature in a viper remote system. It is designed to prevent the activation of remote start if the vehicle is in gear. If this wire isn’t getting any ground signal, then the start system will be disabled hence causing remote problems. Therefore, you should check and see if it is getting a ground signal.

How does Viper SmartStart work with your phone?

Viper SmartStart is the only vehicle security and remote start system that works with your smartphone. Viper SmartStart is a clever solution that combines the functionality of your vehicle’s key fob with your cell phone. Let’s face it; your vehicle can be pretty uncomfortable in extreme weather.