Menu Close

How do you calculate cedar shake siding?

How do you calculate cedar shake siding?

We must:

  1. Measure the length and width of all surfaces to be covered.
  2. Multiply the length by the width of each side.
  3. Add the totals for each side of the project.
  4. Calculate the number of shingles needed.

How much of a cedar shake is exposed?

The exposure of a shake or shingle is that portion which is exposed to weather. So, if you look at a roof with 24-inch shakes installed and you can see 10 inches of the length of each shake, the exposure is 10 inches. Both shakes and shingles have minimum slope requirements.

How much is a bundle of cedar shake siding?

Cedar shake siding costs between $6 and $12 per square foot for materials and installation. Shingle siding costs $6 to $10 per square foot. To put cedar siding on an entire house, it costs $9,000 to $19,000 or more, depending on the size of the home.

How many square feet does a bundle of shake shingles cover?

Each bundle covers 33.3 sq. ft. of roof area—which is close enough to the 32 sq. ft.

Are cedar shake roofs a fire hazard?

One of the most prominent reasons that cedar shake roofs are a thing of the past is that cedar shingles present a fire hazard. After all, cedar is wood, and wood can catch fire in the right conditions.

How many square feet will a bundle of cedar shakes cover?

A standard bundle of white cedar shingles covers 25 sq. ft (2.3 m2) if the exposure is 5 in (12.5 cm). Cedar shingles are measured in squares, 1 square = 4 bundles.

How many shakes are in a bundle?

Bundles are referred to by the number of courses of butts at each end; a 20/20 bundle has 20 layers at each end, or 40 layers in total. Bundles are usually packed so that four bundles of shingles or five bundles of shakes constitute a square.

How much is a square of cedar shingles?

The average roofing installation price for a cedar shingle roof costs anywhere between $7,649 to $11,474 on an 1,800 sq. ft home. You can expect to pay $4.50 to $9.00 per sq. foot or $450 to $900 per square for wood shingles when installed on a standard sized single story home.

How many shake shingles are in a bundle?

For traditional asphalt 3-tab roof shingles, there are 26 pieces in a bundle. Architectural shingles will have around 21 shingles per bundle for similar square footage, as they are larger than standard 3-tab shingles. Depending on the shingle manufacturer, the number of shingles in a bundle can vary widely.

How much does a bundle of shakes cover?

For example: 18 shake bundles 12/12 should cover 100 square feet at 7 1/2 exposure. 9/9 ” pack should give 75% coverage of a square.

How big should a cedar shake bundle be?

For example: 18 shake bundles 12/12 should cover 100 square feet at 7 1/2″ exposure. 9/9 pack should give 75% coverage of a square. Check with your supplier to confirm specific packaging (bundle size) used for your order. “.

How many sq feet does a box of cedar shingles cover?

Similarly, how many square feet does a box of cedar shingles cover? Each bundle of cedar shingles should cover about 33.3 Sq. Ft. or 4 bundles for a roof square which is 100 Sq. In respect to this, how much does a bundle of cedar shingles cost? Comparing Per Square & Bundle Prices of Shakes

How many shake Bundles should cover 1 square foot?

This will alter the number of bundles required to cover 1 square. For example: 18 shake bundles 12/12 should cover 100 square feet at 7 1/2″ exposure. 9/9 pack should give 75% coverage of a square. Check with your supplier to confirm specific packaging (bundle size) used for your order. “.

How to calculate the number of cedar shingles you need?

Before you can install cedar shingles on the roof of your house, you’ll need to calculate how many shingles it will take to cover your roof effectively. Cedar shingles are often sold by the bundle, and beginners may not understand how to figure out the number of bundles they will need for a given project.